The ACE980789 is an ultra-fast, cycle-deterministic hardware accelerator engineered by Accelerated Computing Engineering (ACE) for real-time 6-Degree-of-Freedom (6-DOF) robotic closed-loop Inverse Kinematics (IK). Operating as a production-grade "Math-to-Silicon" architecture, the core transforms non-linear differential kinematics, dynamic $6 \times 6$ geometric Jacobian evaluation, task-space position and angular-twist error regulation, and Damped Least-Squares (DLS) regularized matrix inversion directly into dedicated, pipelined FPGA silicon.
Performing inverse kinematics directly on the FPGA eliminates the communication latency and bus-arbitration jitter encountered when transferring joint feedback and Cartesian setpoints across external buses to an industrial PC (IPC) or host Microprocessor/Microcontroller (MPU/CPU). Solving the entire non-linear kinematic chain within silicon enables execution velocities that are strictly unattainable through conventional software architectures, collapsing iteration latency from hundreds of microseconds down to 8.260 μs on a mid-tier FPGA.
A defining architectural innovation of the ACE980789 is its command-state tracking paradigm: the internal kinematic loop updates and tracks commanded joint angles rather than differentiating raw encoder feedback. Executing a complete iterative pass in $8.260\ \mu\text{s}$ ($1,652$ clock cycles at $200\text{ MHz}$), the physical manipulator displaces by a distance well below the discrete resolution threshold of standard industrial optical encoders within a single cycle. Attempting to differentiate raw encoder feedback over sub-$10\ \mu\text{s}$ intervals would inject severe quantization chatter and discrete noise. By closing the high-bandwidth kinematic integration loop around the commanded state while integrating physical feedback, the ACE980789 achieves continuous sub-micron Cartesian convergence without hunting or limit cycles—even under coarse 12-bit encoder quantization or transient physical actuator stalls—on a 1 m-class reference manipulator.
The core achieves an exceptionally lean resource utilization footprint ($8.70\%$ of Slice LUTs and only $4$ DSP48E1 slices on an entry-level AMD Artix-7 XC7A100T), allowing system integrators to embed real-time 6-DOF kinematics into existing onboard FPGAs without modifying Bill-of-Materials (BOM) costs or requiring board redesigns.
Visit www.accelerated-computing.be for more information.
XC7A100T FPGA.2Q30 fixed-point CORDIC joint trigonometry with an IEEE-754 Single-Precision (FP32) floating-point datapath for geometric Jacobian evaluation and unrolled $6 \times 6$ Cholesky matrix inversion.The ACE980789 executes an end-to-end, closed-loop Damped Least-Squares (DLS) differential kinematics solver resolving 6-DOF task-space Cartesian position and angular twist displacements into incremental configuration-space joint adjustments.
Joint angles are represented as signed 32-bit fixed-point numbers in 2Q30 format (1 sign bit, 1 integer guard bit, 30 fractional bits) over the principal normalized interval $[-1.0, +1.0)$ scaled radians (0xC0000000 $= -\pi$ to 0x3FFFFFFF $= +\pi - 1\text{ LSB}$), where $1.0$ scaled radian equals $\pi$ radians. The extra integer guard bit provides a full $[-2.0, +2.0)$ dynamic range (0x80000000 to 0x7FFFFFFF), preventing intermediate saturation during large transient excursions while preserving exact trigonometric periodicity modulo $2.0$ without branching logic. Dedicated unrolled CORDIC primitives evaluate the sine and cosine of all six commanded joints concurrently.
Using the analytical manipulator link parameters—shoulder height $D_1$, upper arm length $A_2$, elbow offset $A_3$, forearm length $D_4$, and tool flange offset $D_6$—the forward kinematics pipeline resolves the current commanded Tool Center Point (TCP) Cartesian coordinates $(P_{X,\text{cmd}}, P_{Y,\text{cmd}}, P_{Z,\text{cmd}})$:
$$\begin{aligned} c_{23} &= c_2 c_3 - s_2 s_3, \qquad s_{23} = s_2 c_3 + c_2 s_3 \\ r_w &= A_2 c_2 + A_3 c_{23} + D_4 s_{23}, \qquad z_w = D_1 + A_2 s_2 + A_3 s_{23} - D_4 c_{23} \\ d_r &= D_6 c_4 s_5, \qquad d_t = D_6 s_4 s_5, \qquad d_z = D_6 c_5 \\ r_{\text{total}} &= r_w + c_{23} d_r + s_{23} d_z \end{aligned}$$
$$P_{X,\text{cmd}} = c_1 r_{\text{total}} - s_1 d_t, \qquad P_{Y,\text{cmd}} = s_1 r_{\text{total}} + c_1 d_t, \qquad P_{Z,\text{cmd}} = z_w + s_{23} d_r - c_{23} d_z$$
The 6-dimensional task-space error vector $\mathbf{e} \in \mathbb{R}^{6 \times 1}$ is synthesized by scaling the Cartesian position displacement and angular velocity twist difference against the closed-loop task-space gain $K_{\text{ik}}$:
$$\mathbf{e}_{[0..2]} = K_{\text{ik}} \left( \mathbf{P}_{\text{target}} - \mathbf{P}_{\text{cmd}} \right), \qquad \mathbf{e}_{[3..5]} = K_{\text{ik}} \left( \boldsymbol{\omega}_{\text{target}} - \boldsymbol{\omega}_{\text{curr}} \right)$$
The core evaluates the full $6 \times 6$ analytical geometric Jacobian matrix $\mathbf{J}(\mathbf{q})$ concurrently in IEEE-754 single precision. To invert the kinematic mapping cleanly across singular configurations—including wrist singularities ($q_5 = 0$), full arm radial extensions, and overhead shoulder-axis traversals—the core synthesizes the symmetric $6 \times 6$ normal matrix $\mathbf{H}$ with scalar Levenberg-Marquardt damping $\lambda^2$:
$$\mathbf{H} = \mathbf{J}\mathbf{J}^T + \lambda^2 \mathbf{I}$$
The regularized matrix $\mathbf{H}$ is factored into a lower-triangular matrix $\mathbf{L}$ such that $\mathbf{L}\mathbf{L}^T = \mathbf{H}$, followed by sequential forward substitution ($\mathbf{L}\mathbf{y} = \mathbf{e}$), backward substitution ($\mathbf{L}^T\mathbf{z} = \mathbf{y}$), and configuration-space back-projection:
$$\Delta\mathbf{q} = \mathbf{J}^T \mathbf{z}, \qquad \mathbf{q}_{\text{next}} = \text{wrap}_{[-1, +1)}\big(\mathbf{q}_{\text{cmd}} + \Delta\mathbf{q}\big)$$
Because the Jacobian and error scaling are formulated directly in scaled radians, $\Delta\mathbf{q}$ is produced directly in scaled radians and latched into the 2Q30 commanded joint registers without software division.
| Parameter / Input | Recommended Operating Range | Engineering Rationale |
|---|---|---|
Closed-Loop Gain (KIK) |
0.100 to 0.250 |
Provides overdamped to critically damped discrete convergence in 6–26 cycles; values $\ge 0.300$ approach discrete-time gain overshoot on large steps. |
DLS Damping (LAMBDA_SQ) |
$2.0 \times 10^{-5}$ to $1.0 \times 10^{-3}$ ($1.0 \times 10^{-4}$ nominal) | Maintains FP32 Cholesky positive-definiteness across exact wrist, elbow, and overhead singularities without excessive steady-state lag. |
| Setpoint Step Rate | Interpolated ($\le 5\text{ mm/cycle}$) | At $121.06\text{ kHz}$, $5\text{ mm/cycle}$ corresponds to $> 600\text{ m/s}$ Cartesian velocity—far exceeding physical manipulators while keeping per-cycle $|\Delta q| < 0.5$ scaled rad. |
Initial Seed Angles (Q_CMD_FX) |
$[-1.0, +1.0)$ scaled rad (0xC0000000..0x3FFFFFFF) |
Principal $[-\pi, +\pi)$ interval; internal 2Q30 accumulator seamlessly handles transient excursions into $[-2.0, +2.0)$ during $\pm\pi$ wrap crossings. |
Post-implementation resource utilization and timing closure metrics below are extracted directly from the routed AMD Vivado implementation targeting the AMD Artix-7 XC7A100T FPGA (xc7a100tcsg324-1), isolating the standalone ACE980789 core from evaluation testbench logic:
| Resource Primitive | ACE980789 Used | XC7A100T Available | Utilization (%) |
|---|---|---|---|
| Slice LUTs (Total) | 5,518 | 63,400 | 8.70% |
| • LUT as Logic | 5,419 | 63,400 | 8.55% |
| • LUT as Memory (Distributed RAM / SRL) | 99 | 19,000 | 0.52% |
| Slice Registers (Flip-Flops) | 5,854 | 126,800 | 4.62% |
| Occupied Slices | 1,653 | 15,850 | 10.43% |
| Block RAM (RAMB36 / 36Kb Tiles) | 1.0 | 135.0 | 0.74% |
| DSP48E1 Slices | 4 | 240 | 1.67% |
| F7 / F8 Multiplexers | 228 / 40 | 31,700 / 15,850 | 0.72% / 0.25% |
clk_fast): $200.0\text{ MHz}$ nominal ($5.00\text{ ns}$ period), closed with WNS = +0.267 ns and WHS = +0.034 ns (0 failing endpoints across 11,897 routed endpoints under worst-case -1 commercial process corners).clk_user): Decoupled dual-port BRAM clock domain supporting $50\text{ MHz}$ to $160+\text{ MHz}$ AXI interconnects or direct RTL state machines.Host communication is handled through a 32-bit True Dual-Port Block RAM (depth: 1,024 words). Port A connects to the user/host bus, while Port B connects directly to the internal kinematic engine.
| Word Addr | Register Name | Dir | Format | Functional Description |
|---|---|---|---|---|
0 | START_CMD | IN/OUT | U32 Flag | Write 0x1 to trigger computation pass; hardware clears to 0x0 at Cycle 1652. |
1 .. 5 | D1, A2, A3, D4, D6 | IN | FLOAT32 | Manipulator kinematic link lengths and joint offsets (meters). |
6 | LAMBDA_SQ | IN | FLOAT32 | Levenberg-Marquardt damping factor $\lambda^2$ for DLS singularity regularization. |
7 | KIK | IN | FLOAT32 | Closed-loop task-space tracking integration gain. |
8 .. 22 | RESERVED | IN | FLOAT32 | Reserved for feedforward gravity/PD torque options (initialize to 0.0). |
23 .. 28 | Q_ACT_FX[0..5] | IN | 2Q30 | Measured joint encoder feedback angles (scaled radians, $1.0 = \pi$). |
29 .. 34 | Q_CMD_FX[0..5] | IN/OUT | 2Q30 | Commanded joint state vector; updated autonomously in-place at Cycle 1652. |
35 .. 37 | TARGET_P[X,Y,Z] | IN | FLOAT32 | Desired TCP Cartesian position setpoints $[X, Y, Z]$ (meters). |
38 .. 40 | TARGET_W[X,Y,Z] | IN | FLOAT32 | Desired tool angular velocity twist vector $[\omega_x, \omega_y, \omega_z]$ ($\text{rad/s}$). |
41 .. 43 | W_CURR[X,Y,Z] | IN | FLOAT32 | Current estimated tool angular velocity twist vector ($\text{rad/s}$). |
70 .. 72 | PX, PY, PZ_CMD | OUT | FLOAT32 | Real-time forward kinematics TCP Cartesian coordinates (meters). |
73 .. 78 | e[0..5] | OUT | FLOAT32 | Scaled 6-DOF task-space error vector (diagnostic telemetry). |
150 .. 155 | DQ[0..5] | OUT | FLOAT32 | Calculated configuration-space joint velocity increments ($\Delta q$ in scaled rad). |
156 .. 161 | NEXT_Q_CMD[0..5] | OUT | 2Q30 | Autonomous next commanded joint state vector for servo drive injection. |
The ACE980789 silicon implementation on the AMD Artix-7 XC7A100T was validated against a 22-scenario automated HIL verification suite spanning nine distinct operational and stress domains. Both the FPGA accelerator and the independent double-precision software golden twin (AceIkTwin) maintained autonomous closed-loop state accumulators across every multi-step run.
0x00000000, 0xFFFFFFFF, 0xA5A55A5A, 0x3FC00000).LOCK-A): Maximum TCP discrepancy bounded at $1.37\ \mu\text{m}$ and maximum joint increment discrepancy at $25.28\ \mu\text{rad}$ across 20 consecutive steps.TWIST-01): With simultaneous non-zero TARGET_W and W_CURR inputs, the hardware task-space error vector e[0..5] matched the double-precision model to $9.92 \times 10^{-8}$ and joint velocity increments matched within $20.04\ \mu\text{rad}$.| Test ID | Domain | Scenario & Stress Condition | Conv. Step | Final TCP Parity | Max $|\Delta q|$ | Latency |
|---|---|---|---|---|---|---|
NOM-01 | Nominal | Nominal Vertical Step ($+20\text{ mm}$ in Z, $K_{\text{ik}}=0.200$, $\lambda^2=10^{-4}$) | Step 013 | 0.31 μm | 0.4095 | 1,652 cyc |
NOM-02 | Nominal | Compound 3D Move from Alternate Seed Posture B | Step 011 | 1.64 μm | 0.4286 | 1,652 cyc |
NOM-03 | Nominal | Zero-Error Stationary Hold (Target == Initial FK) | Step 000 | 0.57 μm | 0.0000 | 1,652 cyc |
SING-01 | Singularity | Exact Wrist Singularity ($q_5 = 0.0\text{ rad}$, collinear axes 4 & 6) | Step 155 | 0.70 μm | 0.0109 | 1,652 cyc |
SING-02 | Singularity | Near-Wrist Singularity Perturbation ($q_5 = 10^{-4}$ scaled rad) | Step 059 | 0.72 μm | 0.0365 | 1,652 cyc |
SING-03 | Singularity | Full Radial Arm Extension / Elbow Boundary Singularity | Step 006 | 1.06 μm | 0.0888 | 1,652 cyc |
SING-04 | Singularity | Overhead Base-Axis Singularity Traversal (Near Z-Axis) | Step 031 | 1.12 μm | 0.0012 | 1,652 cyc |
WRAP-01 | Phase-Wrap | 2Q30 $\pm\pi$ Boundary Rollover ($+0.999 \rightarrow -0.999$ scaled rad) | Step 008 | 1.19 μm | 0.1364 | 1,652 cyc |
WRAP-02 | Phase-Wrap | Exact 2Q30 Extremes ($-1.0$ and $+0.999999999$ scaled rad) | Step 006 | 0.77 μm | 0.0117 | 1,652 cyc |
WRAP-03 | Phase-Wrap | Back-Hemisphere ($-X$) Base Yaw Crossing $\pm\pi$ Boundary | Step 007 | 0.88 μm | 0.0592 | 1,652 cyc |
SAT-01 | Saturation | Out-of-Reach Workspace Saturation ($2.5\text{ m}$ Goal @ $5\text{ mm/step}$) | Bounded | 14.15 μm | 0.3077 | 1,652 cyc |
SAT-02 | Saturation | Boundary-Grazing Unreachable Target ($1.05\text{ m}$ Envelope) | Bounded | 4.71 μm | 0.0334 | 1,652 cyc |
ENC-01 | Encoder Stress | Coarse 12-Bit Encoder Quantization ($1.53\text{ mrad}$ LSB Floor) | Step 012 | 0.78 μm | 0.3789 | 1,652 cyc |
ENC-02 | Encoder Stress | 16-Bit Encoder with $\pm 3$ LSB Oscillating Measurement Noise | Step 013 | 0.75 μm | 0.3955 | 1,652 cyc |
ENC-03 | Encoder Stress | Stalled Physical Plant (Frozen Q_ACT_FX vs Command Loop) | Step 013 | 0.31 μm | 0.4095 | 1,652 cyc |
NUM-01 | Numerical | Low DLS Regularization Conditioning ($\lambda^2 = 2.0 \times 10^{-5}$) | Step 016 | 4.35 μm | 0.4191 | 1,652 cyc |
NUM-02 | Numerical | High-Gain Operating Envelope Upper Limit ($K_{\text{ik}} = 0.250$) | Step 013 | 0.53 μm | 0.4691 | 1,652 cyc |
GEO-01 | Geometry | Degenerate Spherical Wrist & Zero Offset ($A_3=0.0, D_6=0.0$) | Step 060 | 1.05 μm | 0.0114 | 1,652 cyc |
GEO-02 | Geometry | Micro-Manipulator Link Scale ($80\text{ mm}$ Links, $5\text{ mm}$ Step) | Step 016 | 0.08 μm | 0.0827 | 1,652 cyc |
TRAJ-01 | Trajectory | 4-Corner Square Box + Sudden Step Reversal (5 Waypoints) | Step 167 | 1.60 μm | 0.0617 | 1,652 cyc |
To support offline verification, trajectory pre-planning, and Hardware-in-the-Loop regression testing, ACE delivers the Python reference twin class (AceIkTwin) alongside the exhaustive 22-scenario HIL validation testbench:
import math
import numpy as np
class AceIkTwin:
"""Bit-accurate software golden twin for the ACE980789 6-DOF IK accelerator.
Angles are expressed in scaled radians [-1.0, +1.0), where 1.0 = pi rad.
"""
def __init__(self, D1: float, A2: float, A3: float, D4: float, D6: float,
lambda_sq: float = 0.0001, Kik: float = 0.200):
self.D1, self.A2, self.A3 = float(D1), float(A2), float(A3)
self.D4, self.D6 = float(D4), float(D6)
self.lambda_sq = float(lambda_sq)
self.Kik = float(Kik)
@staticmethod
def wrap_to_scaled_pi(scaled_rad: float) -> float:
"""Wraps an angle strictly to [-1.0, +1.0) scaled radians."""
return ((scaled_rad + 1.0) % 2.0) - 1.0
@staticmethod
def scaled_rad_to_2q30(scaled_rad: float) -> int:
"""Encodes scaled radians [-1.0, +1.0) into signed 32-bit 2Q30 format."""
wrapped = ((scaled_rad + 1.0) % 2.0) - 1.0
raw = int(round(wrapped * (1 << 30)))
raw = max(-(1 << 31), min((1 << 31) - 1, raw))
return raw & 0xFFFFFFFF
@staticmethod
def u32_to_scaled_rad(u_val: int) -> float:
"""Decodes signed 32-bit 2Q30 register value into scaled radians."""
signed = u_val - (1 << 32) if (u_val & (1 << 31)) else u_val
return float(signed) / float(1 << 30)
def forward_kinematics(self, q_cmd_scaled: list[float]) -> tuple[float, float, float]:
"""Computes Cartesian TCP position (PX, PY, PZ) in meters."""
q_rad = [self.wrap_to_scaled_pi(float(x)) * math.pi for x in q_cmd_scaled]
s1, s2, s3, s4, s5, s6 = [math.sin(qi) for qi in q_rad]
c1, c2, c3, c4, c5, c6 = [math.cos(qi) for qi in q_rad]
c23 = (c2 * c3) - (s2 * s3)
s23 = (s2 * c3) + (c2 * s3)
rw = (self.A2 * c2) + (self.A3 * c23) + (self.D4 * s23)
zw = self.D1 + (self.A2 * s2) + (self.A3 * s23) - (self.D4 * c23)
dr, dt, dz = self.D6 * c4 * s5, self.D6 * s4 * s5, self.D6 * c5
r_total = rw + (c23 * dr) + (s23 * dz)
PX_cmd = (c1 * r_total) - (s1 * dt)
PY_cmd = (s1 * r_total) + (c1 * dt)
PZ_cmd = zw + (s23 * dr) - (c23 * dz)
return PX_cmd, PY_cmd, PZ_cmd
def step(self, q_cmd_scaled: list[float], target_pos: list[float],
target_w: list[float] = None, w_curr: list[float] = None) -> dict:
"""Executes one deterministic DLS pipeline pass mirroring the FPGA RTL."""
target_w = [0.0, 0.0, 0.0] if target_w is None else target_w
w_curr = [0.0, 0.0, 0.0] if w_curr is None else w_curr
# 1. Joint trigonometry & Forward Kinematics
q_rad = [self.wrap_to_scaled_pi(float(x)) * math.pi for x in q_cmd_scaled]
s1, s2, s3, s4, s5, s6 = [math.sin(qi) for qi in q_rad]
c1, c2, c3, c4, c5, c6 = [math.cos(qi) for qi in q_rad]
c23 = (c2 * c3) - (s2 * s3)
s23 = (s2 * c3) + (c2 * s3)
rw = (self.A2 * c2) + (self.A3 * c23) + (self.D4 * s23)
zw = self.D1 + (self.A2 * s2) + (self.A3 * s23) - (self.D4 * c23)
dr, dt, dz = self.D6 * c4 * s5, self.D6 * s4 * s5, self.D6 * c5
r_total = rw + (c23 * dr) + (s23 * dz)
PX_cmd = (c1 * r_total) - (s1 * dt)
PY_cmd = (s1 * r_total) + (c1 * dt)
PZ_cmd = zw + (s23 * dr) - (c23 * dz)
# 2. Task-space position & angular twist error
e = np.array([
self.Kik * (target_pos[0] - PX_cmd),
self.Kik * (target_pos[1] - PY_cmd),
self.Kik * (target_pos[2] - PZ_cmd),
self.Kik * (target_w[0] - w_curr[0]),
self.Kik * (target_w[1] - w_curr[1]),
self.Kik * (target_w[2] - w_curr[2]),
], dtype=np.float32)
# 3. 6-DOF analytical geometric Jacobian
diff_p = (-s23 * dr) + (c23 * dz)
diff_v = (c23 * dr) + (s23 * dz)
J = np.zeros((6, 6), dtype=np.float32)
J[0, 0] = -PY_cmd; J[1, 0] = PX_cmd; J[5, 0] = 1.0
J[0, 1] = c1 * ((-self.A2 * s2) - (self.A3 * s23) + (self.D4 * c23) + diff_p)
J[1, 1] = s1 * ((-self.A2 * s2) - (self.A3 * s23) + (self.D4 * c23) + diff_p)
J[2, 1] = (self.A2 * c2) + (self.A3 * c23) - (self.D4 * s23) + diff_v
J[3, 1] = s1; J[4, 1] = -c1
J[0, 2] = c1 * ((-self.A3 * s23) + (self.D4 * c23) + diff_p)
J[1, 2] = s1 * ((-self.A3 * s23) + (self.D4 * c23) + diff_p)
J[2, 2] = (self.A3 * c23) - (self.D4 * s23) + diff_v
J[3, 2] = s1; J[4, 2] = -c1
J[0, 3] = (-s1 * dr) - (c1 * c23 * dt)
J[1, 3] = (c1 * dr) - (s1 * c23 * dt)
J[2, 3] = -s23 * dt; J[3, 3] = c1 * c23; J[4, 3] = s1 * c23; J[5, 3] = s23
J[0, 4] = c1 * ((c23 * c4 * c5 * self.D6) - (s23 * s5 * self.D6)) - (s1 * s4 * c5 * self.D6)
J[1, 4] = s1 * ((c23 * c4 * c5 * self.D6) - (s23 * s5 * self.D6)) + (c1 * s4 * c5 * self.D6)
J[2, 4] = (s23 * c4 * c5 * self.D6) + (c23 * s5 * self.D6)
J[3, 4] = (s1 * s4) - (c1 * s23 * c4); J[4, 4] = (-c1 * s4) - (s1 * s23 * c4); J[5, 4] = c23 * c4
wrist_u = (c23 * c5) + (s23 * c4 * s5)
wrist_v = s4 * s5
J[3, 5] = (c1 * wrist_u) - (s1 * wrist_v)
J[4, 5] = (s1 * wrist_u) + (c1 * wrist_v)
J[5, 5] = (s23 * c5) - (c23 * c4 * s5)
# 4. Damped Least-Squares Cholesky solve & 2Q30 accumulator update
H = J @ J.T + self.lambda_sq * np.eye(6, dtype=np.float32)
L = np.linalg.cholesky(H)
z = np.linalg.solve(L.T, np.linalg.solve(L, e))
dq = J.T @ z
raw_next = [self.wrap_to_scaled_pi(q_cmd_scaled[i] + float(dq[i])) for i in range(6)]
next_q = [self.u32_to_scaled_rad(self.scaled_rad_to_2q30(raw_next[i])) for i in range(6)]
return {
'PX_cmd': PX_cmd,
'PY_cmd': PY_cmd,
'PZ_cmd': PZ_cmd,
'e': e,
'dq': dq,
'next_q_cmd_scaled': next_q,
}
While the ACE980789 is delivered as a turnkey, production-verified IP core, Accelerated Computing Engineering's "Math-to-Silicon" methodology enables rapid bespoke adaptations:
The ACE980789 is supplied as a synthesis-ready, encrypted netlist Vivado IP core compatible with the AMD Vivado IP Catalog. Each licensed package includes:
ace_ik_twin.py).For licensing inquiries, evaluation bitstreams, and custom core engineering, contact engineering@accelerated-computing.be or visit www.accelerated-computing.be.
Data Privacy note: By contacting us via email, you agree that we will use your provided contact details and mathematical specifications solely to evaluate project feasibility during our early-access phase. We do not sell or share your personal information with third parties. We may use standard web analytics tools to monitor basic, aggregated website traffic to improve our site performance.